Description
MAXCRYL® is a water-based pure acrylic
product to be used as an admixture to
increase both physical and chemical
properties of cement-based mortars and
concrete. The fresh mixes prepared with
MAXCRYL®, provide greater adhesion,
workability, cohesion and water retention.
Once hardened, MAXCRYL® improves the
mechanical resistances to compressive and
flexural strength, enhances abrasion and
wearing resistance, and provides a reduction
of water absorption by capillarity.
Application Fields
MAXCRYL® gives MAXSEAL®,
CONCRESEAL® PLASTERING and other
DRIZORO® mortars, greater adhesion to
smooth surfaces and improves curing
process.
As an admixture for mortars in: structural
and pavement repair, levelling of surfaces,
protection and decoration of facades, etc.
Preparation of a cement-based bonding
slurry in repairs, screeds and/or levelling
previously to pour concrete or mortar, on
both vertical and horizontal surfaces.
Improvement of quality for masonries and
renders with low cost.
Porosity sealer and primer applied directly
on the surface.
Advantages
Improves the workability of the mixture
and reduces water demand with the same
consistency, thus minimizes the shrinkage
and risk of hydraulic cracks during the
hardening.
Enhanced the adhesion over polished
surfaces or substrates specially absorbent.
Provides a better curing under high
temperature conditions, due to the higher
water retention, reducing the risk of plastic
cracks.
Increase the abrasion and wearing
resistance of pavement repair mortars.
Resistant to U.V. rays, it does not turn
yellow in outdoor. Increases the durability
and weathering of mortar and coatings.
Very good resistance to saponification and
alkalinity of the cement and it does not
deteriorate in immersion applications.
Improves the impermeability of mortars,
reducing the water absorption by
capillarity.
Solvent-free and non-flammable.
Environment friendly.
